Industrial Application Case Study - Data Acquisition Ultrasonic Testing

Industrial Applications

Pipeline Testing

Customer Case

The customer wants to test pipelines for corrosion and cracks. They intend to use a small robot which they can send into the pipeline. This robot's purpose is to test the pipe by ultrasound and magnetic field for cracks, corrosion and other damage. The customer is using 2 different types of transducers, one for ultrasound and one for the magnetic field. They are sending a pulse with a magnetic field generator, capturing the received signal, rotating the transducer 1/2 degree and then sending another pulse and capturing signal again. After a complete 360 degree rotation, they will need to perform calculations on the data to get the results of the magnetic test. The same process is repeated for the ultrasound testing.

GaGe Case Solution

They are looking for small imperfections, so we suggested a CompuScope 12100. With its 12-bit resolution, multiple input ranges, fast signal capture and fast PCI data transfer, the CompuScope 12100 was exactly what they needed.

GaGe Case Recommended Products

  • CompuScope 12100-8M

Industrial Application Request

We encourage you to contact us and discuss your industrial application in more detail with our engineering team. GaGe can provide tailored custom data acquisition hardware and software solutions to meet specific application requirements:

Submit Application Request