High Speed Digitizers for PCI Bus
High Speed Digitizers, 8 Bit Family
High Speed Digitizers, 12 Bit Family
High Speed Digitizers, 14 Bit Family
High Speed Digitizers, 16 Bit Family
High Speed Digitizers for PCI Bus

print this

email this

Need a Solution?
GaGe application engineers can provide the answer




 

  GaGe High Speed Digitizers Contact Us | About Us | Site Map  
 

Products — High Speed Digitizers, Digital Oscilloscopes, PC Oscilloscopes - 12-Bit


CS12400 High Speed Digitizer or PC Oscilloscope

400 MS/s, 12-Bit Waveform Digitizer for PCI Bus

View Features
View Specifications
Supporting Software
Request Prices
Ordering Information
 

The CompuScope 12400 high speed digitizer, otherwise known as digital oscilloscope or PC oscilloscope, features 12-bit vertical resolution, 400 MS/s sampling, and high 200 MHz bandwidth.

The fast sampling rate enables the capture of high-speed signals with ultra-high timing precision. The high resolution allows the capture of signals with very high dynamic range. The CS12400 high speed digitizers are now available with up to 2 GB of on-board memory.

Try our GageScope® Windows-based PC oscilloscope software for programming-free operation or one of our Software Development Kits for C/C#, LabVIEW or MATLAB for custom development.

Options:
View eXpert™ FIR Filtering Firmware Option
View eXpert™ Signal Averaging Firmware Option
View eXpert™ Peak Detection Firmware Option

*Special: eXpert Firmware Option Bundle

Order all three eXpert™ firmware options (Signal Averaging, FIR Filtering and Peak Detection) for the CS12400 high speed digitizer or digital oscilloscope and pay only the price for two. This is a saving of $995!


Features
  • 200 MS/s sampling on 2 synchronous channels or 400 MS/s on one channel
  • 12 bits nominal resolution
  • 200 MHz bandwidth
  • Full-size, single-slot PCI card
  • Up to 2 Gigasamples of on-board acquisition memory
  • Full-featured, software-controlled front-end
  • 32 bits, 66 MHz PCI standard for 200 MB/s transfer to PC memory
  • Compatible with GageScope oscilloscope software
  • Software Development Kits available for LabVIEW, MATLAB, C/C#

Return to product Category

 
   KineticSystems | DynamicSignals | Signatec © Gage Applied Technologies 2012